disco 200 tdi
+4
ando227
tat2_al
Steve
DICKY
8 posters
Page 3 of 5
Page 3 of 5 • 1, 2, 3, 4, 5
Re: disco 200 tdi
Looking good but it will look even beter when you get your new wheels onand the arches
CLUNYKNOX- Posts : 722
Join date : 2008-07-17
Age : 57
Location : Alness and where ever wife puts me
Re: disco 200 tdi
i got my rear shocks today de carrbon +2".
still have to fit my sumo bars and finnish my sills and rear arches this weekend i am on the look out for under body protection as i have none yet. i was thinking of making my own as i can work with steel plate and just copying the ones on the works disco
still have to fit my sumo bars and finnish my sills and rear arches this weekend i am on the look out for under body protection as i have none yet. i was thinking of making my own as i can work with steel plate and just copying the ones on the works disco
DICKY- Posts : 461
Join date : 2008-07-15
Age : 58
Location : FRIOCKHEIM ANGUS
Re: disco 200 tdi
Well you have all the tools there to make your own protection prob alot cheaper to and stronger.
Re: disco 200 tdi
i got my hands on steel plate for making my tank and sump guards
DICKY- Posts : 461
Join date : 2008-07-15
Age : 58
Location : FRIOCKHEIM ANGUS
Re: disco 200 tdi
well its sitting on my ramp just waiting on me going to work and putting all my new bits on it
hi ho hi ho its off to work i go to fix my disco.yes i am sober
i have 3 hole days to get it just the way i want but still dont have my tyres yet but every thing else will be finnished
hi ho hi ho its off to work i go to fix my disco.yes i am sober
i have 3 hole days to get it just the way i want but still dont have my tyres yet but every thing else will be finnished
DICKY- Posts : 461
Join date : 2008-07-15
Age : 58
Location : FRIOCKHEIM ANGUS
Re: disco 200 tdi
i got a lot done today can you spot the difference
DICKY- Posts : 461
Join date : 2008-07-15
Age : 58
Location : FRIOCKHEIM ANGUS
Re: disco 200 tdi
two more from today as you can see i had to remove the rear quarter panel so i could get welding my sills on. i moved my wheel arch up a few inches then fixed the original wheel arch back on ,i just used tiger seal and a few pop riveits.
DICKY- Posts : 461
Join date : 2008-07-15
Age : 58
Location : FRIOCKHEIM ANGUS
Re: disco 200 tdi
Hi is that box section I see for the sill
CLUNYKNOX- Posts : 722
Join date : 2008-07-17
Age : 57
Location : Alness and where ever wife puts me
Re: disco 200 tdi
i still have to do the other side,but thats for today then i got to make my bash plates an fit my new suspension and sumo bars.the last job is for after the mot and thats to open the fuel pump up and set my turbo so i get more power at low revs by making the turbo spin up sooner,plenty black reek but it is only 4 screws thats why i went for a 200tdi and a bigger intercooler from a frontera 2.3
DICKY- Posts : 461
Join date : 2008-07-15
Age : 58
Location : FRIOCKHEIM ANGUS
Re: disco 200 tdi
i got my sills finished off today
DICKY- Posts : 461
Join date : 2008-07-15
Age : 58
Location : FRIOCKHEIM ANGUS
Re: disco 200 tdi
its all done.well the rear end is any way fitted new coil springs+2" and my de carbon shocks and a 2" lift at the same time yep 4".fitted some tread plate but i still have the front end to sort out and get it painted {next week end }
i also got my sumo bars fitted as well.this is how high it is sitting now its a full 12"above the tyres
i also got my sumo bars fitted as well.this is how high it is sitting now its a full 12"above the tyres
DICKY- Posts : 461
Join date : 2008-07-15
Age : 58
Location : FRIOCKHEIM ANGUS
Re: disco 200 tdi
Looking good just need to get the tyres on now
CLUNYKNOX- Posts : 722
Join date : 2008-07-17
Age : 57
Location : Alness and where ever wife puts me
Re: disco 200 tdi
Crickey!! Thats definately gonna need cranked trailing arms!
Are you going the same height at the front? Have you got the correction bushes?
I'm gonna have to measure the height from my roof to the top of the garage door and see how high I can go lol!
Are you going the same height at the front? Have you got the correction bushes?
I'm gonna have to measure the height from my roof to the top of the garage door and see how high I can go lol!
Re: disco 200 tdi
i have a set of QT cranked arms but as this is going to be my offroad toy and only on the road for a short time then theirs no need to use the arms{as told by the two partners of the land rover garage i work for}the camber will be out but after a good days offroading it will be out anyway, as for tyre ware it will be minimal as i will be mosty on the brown stuff and yes the front is going the same but with longer heavy duty front coil springs to compensate for my winch and stop the front end bouncing when using it
DICKY- Posts : 461
Join date : 2008-07-15
Age : 58
Location : FRIOCKHEIM ANGUS
Re: disco 200 tdi
after giving it some thought and already having the parts then yes i will be fitting my cranked arms at the weekend i also got a price for my tyres 265/75/16 insa turbo special tracks £65 now that's a good deal, so i might just get them on new modulers in black.i should have them by the weekend if i order them in the morning.
BRING ON THE MUD
BRING ON THE MUD
DICKY- Posts : 461
Join date : 2008-07-15
Age : 58
Location : FRIOCKHEIM ANGUS
Re: disco 200 tdi
lol, Looking forward to the pics of it fully lifted with the "big baffies" fitted!!
Re: disco 200 tdi
tyres will be hear in the morning but i cant get the wheels i wanted as there out of stock so i will just keep using my disco wheels for now i will fit my tyres on Saturday and fit my front suspension and QT arms.then all i have to do is paint it with some daft colours i will mot it on Monday at least i no it will pass
i still have to make my under body armour plating and fit it along with my rock sliders.i cant wait to get this finished
its been a quick build as i only work on it at weekends
i still have to make my under body armour plating and fit it along with my rock sliders.i cant wait to get this finished
its been a quick build as i only work on it at weekends
DICKY- Posts : 461
Join date : 2008-07-15
Age : 58
Location : FRIOCKHEIM ANGUS
Re: disco 200 tdi
Hi I just wonder hoe long it would have taken if you had to do it all out side your house (months)
CLUNYKNOX- Posts : 722
Join date : 2008-07-17
Age : 57
Location : Alness and where ever wife puts me
Re: disco 200 tdi
easily a few months and a divorce and sore knees
DICKY- Posts : 461
Join date : 2008-07-15
Age : 58
Location : FRIOCKHEIM ANGUS
Re: disco 200 tdi
It makes so much easier when you have a garage and all the toys its half the battle
Page 3 of 5 • 1, 2, 3, 4, 5
Page 3 of 5
Permissions in this forum:
You cannot reply to topics in this forum